Bohning Triple Tower Fletching Jig 萬用黏羽機
可一次同時黏3片, 可黏直角, 1度和3度
庫存現貨出清
使用 Bohning 的 Tower® Jig同時裝上三個羽片或羽毛！這種革命性的夾具提供了均勻分佈在羽片或羽毛基座上的優異粘合力，確保一致的角度和完美的 120° 間距。耐用的工程級複合材料可以用丙酮清潔以去除粘合劑殘留物。Tower® Jig也非常適合單羽片修復！有多種配置（參見參考圖表）適用於不同的箭桿尺寸和羽片角度，從直裝羽片到 3° 右或左旋羽。所有配置都包括一個底座、三種尺寸的壓力環以適應所有箭桿直徑、一套 3 塊墊片以提供箭尾和羽片之間額外的 0.025" (6mm) 空間，以及夾具釋放膠帶。
完整配置： 包括所有可用的 Tower 夾具組件，一次購買，適合俱樂部和家庭使用。
三重配置： 臂 - 實灰色、黑色和紅色。中柱 - F 箭尾、A 箭尾、HE、標準、Swedged 箭尾、Pin 箭尾。
螺旋配置： 臂 - 黑色、紫色。中柱 - F 箭尾、A 箭尾、HE、標準、十字弓、Pin 箭尾。
十字弓配置： 臂 - 黑色、紅色。中柱 - 十字弓、Swedged 箭尾。
羽毛配置： 臂 - 藍色、綠色（臂有更寬的槽以容納羽毛）。中柱 - F 箭尾、標準、Swedged 箭尾。
Mylar 配置： 臂 - 灰色帶紅色夾子（適應 Spin Wing 類型的羽片）。中柱 - F 箭尾、標準、Pin 箭尾。
| Color of Arms | Fletching Type | Offset/Helical | Max. length of fletching |
| Gray (solid) | Plastic vane | straight | 4" (101mm) |
| Black | Plastic vane | 3° Right | 3" (76mm) |
| Red | Plastic vane | 1° Right | 4" (101mm) |
| Purple | Plastic vane | 3° Left | 3" (76mm) |
| Orange | Plastic vane | 1° Left | 4" (101mm) |
| Blue | Feather | 2° Right | 5" (127mm) |
| Green | Feather | 2° Left | 5" (127mm) |
| Gray w/ red clip | Mylar vane | straight | 3.75" (95mm) |
| Center Post Marking | Corresponding Arrow Size |
| F Nock | .166" (4.23mm) ID |
| A Nock | .204" (5.18mm) ID |
| HE | .231" (5.87mm) ID |
| Standard Carbon | .246" (6.25mm) ID |
| Crossbow Bolt | Bolts up to .35" (8.89mm) OD |
| Pin Nock | pin bushing |
| (unmarked) | Swedged arrows with nocks glued on |
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Fletch three vanes or feathers at once with Bohning's Tower® Jig! This revolutionary fletching jig provides exceptional adhesion force that is evenly distributed along the base of the vane or feather. You will get consistent angles and perfect 120° spacing. The durable, engineering-grade composite material can be cleaned with acetone to remove adhesive residue. The Tower® Jig is great for single vane repairs too! Available in multiple configurations (see reference chart) for different arrow sizes and fletching angles, from straight fletch up to a 3° right or left helical. All configurations include a base, three sizes of pressure rings to accommodate all arrow diameters, a set of 3 Spacer Plates for an extra .025" (6mm) of space between the nock and vane, and Clamp Release Tape.
- COMPLETE: all the available Tower Jig components in one purchase, great for clubs and families.
- TRIPLE: Arms - Solid Gray, Black, & Red. Center Posts - F Nock, A Nock, HE, Standard, Crossbow, Pin Nock.
- HELIX: Arms - Black, Purple. Center Posts - F Nock, A Nock, HE, Standard, Crossbow, Pin Nock.
- CROSSBOW: Arms - Black, Red. Center Post - Crossbow
- FEATHER: Arms - Blue, Green (arms have wider slots to accommodate feathers). Center Posts - F Nock, Standard, Swedged
- MYLAR: Arms - Gray with red clip (accommodates Spin Wing type vanes). Center Posts - F Nock, Standard, Pin Nock.
- IMPULSE: Arms - Yellow (arms have narrow slots to accommodate vanes such as Impulse). Center Posts - F Nock, Standard, Pin Nock. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Bohning Tower™ Jig Introduction
Fletching with the Tower™ Jig
Repairing with the Tower™ Jig
Bohning Tower™ Jig Maintenance
Bohning Tower™ Jig Assembly
Bohning Mylar Tower™ Jig – Assembly & Use Overview
