Specialty Archery 1/4" Hunter Peep Housing
頂尖選手的第一選擇！
Super Ball Peep System 為 Specialty Archery 最知名的可替換式Peep產品
本產品為此Peep系統的支架，無法單獨使用，必須配合專用 aperture 或 Clarifier。
| 顏色： | 迷彩，紅色，藍色，綠色，銀色 |
The Hooded 37 degree Super Hunter Peep 1/4" requires use of alignment tubing. (Alignment tubing sold separately 753-6 or in 750 Kit).
The revolutionary Super Hunter Peep uses optional 1/8" apertures with 5 hole sizes to choose from (1/32", 3/64", 1/16", 3/32", and 1/8") for a bright view. The optional screw-in Verifier lenses sharpen the pins. The optional Clarifiers when used with a scope and lens sharpen the target face.
The Super Ball Peep is designed to accept all of the Super Peep apertures, clarifiers, and verifiers. Use of the 753-3 Peep Adapter is necessary for the 1/8" verifiers, apertures and clarifiers to fit the 1/4" peep. The 1/4" verifiers will screw directly into the peep. Use of optional 210078 dual hex wrench is recommended for insertion of verifiers, clarifiers, and apertures.
The Super Hunter Peep is available in 37 degree string angle groove. See string angle chart in the FAQs section of the website to determine proper groove angle for your bow. Watch the peep tying video when you receive your peep for easy to follow instructions on proper peep installation.
WARNING: Use of Loctite or Acetone on or near any part of the Hunter Peep will cause cracks in the material voiding warranty!
CAUTION: High powered bows create a great amount of vibration. This may loosen verifiers, clarifiers and apertures over time. Tighten your apertures before each use. If you hear a buzzing sound, this indicates a loose aperture. You may use a drop of Vibra-Tite VC 3 (Part #VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.
