Easton XX75 Platinum Plus Shaft 箭桿 (每打)

Easton
$2,400
+ −
加入下次購買清單 加入比較清單

Easton XX75 Platinum Shaft 箭桿

XX75 Platinum provides top-quality aerospace alloy consistency and performance that comes in a full range of sizes for almost any target shooter. Get Platinum for easy set up, quick bow tuning, and super tight groups.

SIZES

1416, 1516, 1616, 1713, 1716, 1813, 1816, 1913, 1916, 2013, 2016, 2114, 2213, 2314, 2315

Straightness: ± .002 
Weight tolerance: ± 2.0 
Hard–anodized 
Alloy

ALLOY SHAFT AND COMPONENT SPECIFICATIONS

SIZE SHAFT WEIGHT SHAFT WEIGHT @ 29" SPINE @ 28" SPAN STOCK LENGTH3 CONVENTIONAL NOCK SIZE4 UNI SYSTEM5 NIBB POINT ONE-PIECE BULLET POINT RPS7INSERT ALUM. RPS7POINT SIZE
XX751 XX72 751/X72 UNI BUSHING6 SUPER UNI BUSHING10
  Grains per Inch Grains Deflection in Inches Inches Inches Grains Grains Grains8 Grains8 Grains8 Grains8
1214 5.9 — 171 2.501 26 — — — — 45 — —
1413 5.9 — 171 2.036 26 7/32 — — — 35 — —
1416 7.2 — 209 1.684 27 7/32 2 — 46 52 — —
1514 — 6.8 197 1.379 26 — 5 — 619 — — —
1516 7.3 — 212 1.403 27½ ¼ 3 — 48 54 — —
1614 — 7.7 223 1.153 28 — 5 — 51 — — —
1616 8.4 — 244 1.079 28½ ¼ 5 — 56 63 — —
1713 7.4 — 215 1.044 29 — 7 — 54 — — —
1714 — 8.1 235 0.963 29 — 7 — 56 — — —
1716 9.0 — 261 0.880 29 ¼ 7 — 60 68 10 17/64
1813 7.9 — 229 0.874 30 ¼ 8 — 56 — 14 9/32
1814 — 8.6 249 0.799 29½ — 8 — 60 — — —
1816 9.3 — 270 0.756 30 9/32 8 — 63 74 12 9/32
1820 12.2 — 354 0.592 29½ 9/32 — — — 59 — —
1913 8.3 — 241 0.733 31 9/32 9 — 64 — 18 5/16
1914 — 9.3 270 0.658 30½ — 9 — 64 — — —
1916 10.0 — 290 0.623 31 9/32 9 — 72 82 16 5/16
2013 9.0 — 261 0.610 32½ — — 5 68 — 21 5/6
2014 — 9.6 278 0.579 31½ — (10) 5 71 — — —
2016 10.6 — 307 0.531 32 — — 4 80 90 20 5/16
2114 9.9 9.9 287 0.510 32½ — (11) 7 78 100 25 5/16
2212 — 8.8 255 0.505 32½ — (13) 9 1029 100 31 11/32
2213 9.8 9.9 284 0.485 32½ — (13) 9 88 100 30 11/32
2214 — 10.4 302 0.425 33 — (13) 9 1039 100 — —
2311 — 8.9 258 0.450 33 — (15) 11 999 100 37 11/32
2311 — 8.9 258 0.450 33 — (15) 11 999 100 37 11/32
2312 — 9.5 276 0.423 33 — (15) 11 999 100 37 11/32
2314 10.7 10.8 310 0.391 33½ — (14) 10 — 100 34 11/32
2315 11.7 11.8 339 0.342 34 — — 11 — 100 37 11/32
2412 — 9.7 281 0.400 34 — (17) 12 110 100 40 11/32
2413 — 10.5 302 0.365 34 — (17) 12 110 100 40 11/32
2511 — 9.6 278 0.348 34½ — (20) 15 1089 100 52 11/32
2512 — 10.3 299 0.321 34½ — (20) 15 1089 100 52 11/32
2612 — 10.7 310 0.285 34½ — (22) 17 — 150 58 3/8
2613 — 11.5 334 0.265 34½ — (22) 17 — 150 58 3/8
2712 — 11.3 328 0.260 34½ — — 19 — 150/300 — —

— Indicates not available
1 XX75 Blues, Jaxx and Platinum Plus
2 X7 Exclipse and Cobalt
3 Length is approximately stock shaft length for each size.
4 Nock size for conventional swaged nock taper.
5 UNI—Universal Nock Installation System
6 Prenthesis indicates smaller G Nock Uni Bushing size is available as an optional accessory.
7 RPS = Replaceable point System with 8.32 ATA Standard thread.
8 NIBB point grain weights are ± 0.5 grain. All other components are ± 1 grain.
9 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.F.O.C. is Front-of-Center balance position on the arrow shaft.
10 Super UNI Bushing accepts Super Nock, 3D Super Nock and S Nock