Easton XX75 Platinum Shaft 箭桿
XX75 Platinum provides top-quality aerospace alloy consistency and performance that comes in a full range of sizes for almost any target shooter. Get Platinum for easy set up, quick bow tuning, and super tight groups.
1416, 1516, 1616, 1713, 1716, 1813, 1816, 1913, 1916, 2013, 2016, 2114, 2213, 2314, 2315
Straightness: ± .002
Weight tolerance: ± 2.0
Hard–anodized
Alloy
ALLOY SHAFT AND COMPONENT SPECIFICATIONS
SIZE | SHAFT WEIGHT | SHAFT WEIGHT @ 29" | SPINE @ 28" SPAN | STOCK LENGTH3 | CONVENTIONAL NOCK SIZE4 | UNI SYSTEM5 | NIBB POINT | ONE-PIECE BULLET POINT | RPS7INSERT ALUM. | RPS7POINT SIZE | ||
XX751 | XX72 | 751/X72 | UNI BUSHING6 | SUPER UNI BUSHING10 | ||||||||
Grains per Inch | Grains | Deflection in Inches | Inches | Inches | Grains | Grains | Grains8 | Grains8 | Grains8 | Grains8 | ||
1214 | 5.9 | — | 171 | 2.501 | 26 | — | — | — | — | 45 | — | — |
1413 | 5.9 | — | 171 | 2.036 | 26 | 7/32 | — | — | — | 35 | — | — |
1416 | 7.2 | — | 209 | 1.684 | 27 | 7/32 | 2 | — | 46 | 52 | — | — |
1514 | — | 6.8 | 197 | 1.379 | 26 | — | 5 | — | 619 | — | — | — |
1516 | 7.3 | — | 212 | 1.403 | 27½ | ¼ | 3 | — | 48 | 54 | — | — |
1614 | — | 7.7 | 223 | 1.153 | 28 | — | 5 | — | 51 | — | — | — |
1616 | 8.4 | — | 244 | 1.079 | 28½ | ¼ | 5 | — | 56 | 63 | — | — |
1713 | 7.4 | — | 215 | 1.044 | 29 | — | 7 | — | 54 | — | — | — |
1714 | — | 8.1 | 235 | 0.963 | 29 | — | 7 | — | 56 | — | — | — |
1716 | 9.0 | — | 261 | 0.880 | 29 | ¼ | 7 | — | 60 | 68 | 10 | 17/64 |
1813 | 7.9 | — | 229 | 0.874 | 30 | ¼ | 8 | — | 56 | — | 14 | 9/32 |
1814 | — | 8.6 | 249 | 0.799 | 29½ | — | 8 | — | 60 | — | — | — |
1816 | 9.3 | — | 270 | 0.756 | 30 | 9/32 | 8 | — | 63 | 74 | 12 | 9/32 |
1820 | 12.2 | — | 354 | 0.592 | 29½ | 9/32 | — | — | — | 59 | — | — |
1913 | 8.3 | — | 241 | 0.733 | 31 | 9/32 | 9 | — | 64 | — | 18 | 5/16 |
1914 | — | 9.3 | 270 | 0.658 | 30½ | — | 9 | — | 64 | — | — | — |
1916 | 10.0 | — | 290 | 0.623 | 31 | 9/32 | 9 | — | 72 | 82 | 16 | 5/16 |
2013 | 9.0 | — | 261 | 0.610 | 32½ | — | — | 5 | 68 | — | 21 | 5/6 |
2014 | — | 9.6 | 278 | 0.579 | 31½ | — | (10) | 5 | 71 | — | — | — |
2016 | 10.6 | — | 307 | 0.531 | 32 | — | — | 4 | 80 | 90 | 20 | 5/16 |
2114 | 9.9 | 9.9 | 287 | 0.510 | 32½ | — | (11) | 7 | 78 | 100 | 25 | 5/16 |
2212 | — | 8.8 | 255 | 0.505 | 32½ | — | (13) | 9 | 1029 | 100 | 31 | 11/32 |
2213 | 9.8 | 9.9 | 284 | 0.485 | 32½ | — | (13) | 9 | 88 | 100 | 30 | 11/32 |
2214 | — | 10.4 | 302 | 0.425 | 33 | — | (13) | 9 | 1039 | 100 | — | — |
2311 | — | 8.9 | 258 | 0.450 | 33 | — | (15) | 11 | 999 | 100 | 37 | 11/32 |
2311 | — | 8.9 | 258 | 0.450 | 33 | — | (15) | 11 | 999 | 100 | 37 | 11/32 |
2312 | — | 9.5 | 276 | 0.423 | 33 | — | (15) | 11 | 999 | 100 | 37 | 11/32 |
2314 | 10.7 | 10.8 | 310 | 0.391 | 33½ | — | (14) | 10 | — | 100 | 34 | 11/32 |
2315 | 11.7 | 11.8 | 339 | 0.342 | 34 | — | — | 11 | — | 100 | 37 | 11/32 |
2412 | — | 9.7 | 281 | 0.400 | 34 | — | (17) | 12 | 110 | 100 | 40 | 11/32 |
2413 | — | 10.5 | 302 | 0.365 | 34 | — | (17) | 12 | 110 | 100 | 40 | 11/32 |
2511 | — | 9.6 | 278 | 0.348 | 34½ | — | (20) | 15 | 1089 | 100 | 52 | 11/32 |
2512 | — | 10.3 | 299 | 0.321 | 34½ | — | (20) | 15 | 1089 | 100 | 52 | 11/32 |
2612 | — | 10.7 | 310 | 0.285 | 34½ | — | (22) | 17 | — | 150 | 58 | 3/8 |
2613 | — | 11.5 | 334 | 0.265 | 34½ | — | (22) | 17 | — | 150 | 58 | 3/8 |
2712 | — | 11.3 | 328 | 0.260 | 34½ | — | — | 19 | — | 150/300 | — | — |
— Indicates not available
1 XX75 Blues, Jaxx and Platinum Plus
2 X7 Exclipse and Cobalt
3 Length is approximately stock shaft length for each size.
4 Nock size for conventional swaged nock taper.
5 UNI—Universal Nock Installation System
6 Prenthesis indicates smaller G Nock Uni Bushing size is available as an optional accessory.
7 RPS = Replaceable point System with 8.32 ATA Standard thread.
8 NIBB point grain weights are ± 0.5 grain. All other components are ± 1 grain.
9 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.F.O.C. is Front-of-Center balance position on the arrow shaft.
10 Super UNI Bushing accepts Super Nock, 3D Super Nock and S Nock