Easton XX75 Legacy Shaft
7075-t9 alloy
Size: | 1916, 2016, 2018, 2020, 2117, 2216, 2219 |
Legacy combines traditional styling with XX75 quality.
1916, 2016, 2018, 2020, 2117, 2216, 2219
Straightness: ± .002
Weight tolerance: ± 1.0%
Cedar, PermaGraphic wood–grain pattern
7075–T9 alloy
ALLOY SHAFT AND COMPONENT SPECIFICATIONS
SIZE13 | SHAFT WEIGHT | SHAFT WEIGHT10@ 29" | SPINE @ 28" SPAN | STOCK LENGTH3 | CONVENTIONAL NOCK SIZE4 | UNI SYSTEM5 | NIBB POINT | ONE-PIECE BULLET POINT | RPS7INSERT ALUM. | RPS7POINT SIZE | ||||
XX751 | XX782 | 751/782 | UNI BUSHING6 | X NOCK BUSHING6 | SUPER UNI BUSHING11 | |||||||||
Grains per Inch | Grains | Deflection in Inches | Inches | Inches | Grains | Grains | Grains8 | Grains8 | Grains8 | |||||
1816 | 9.3 | — | 270 | 0.733 | 30 | 9/32 | 8 | 4 | — | 63 | 74 | 12 | 9/32 | |
1916 | 10.0 | — | 290 | 0.623 | 31 | 9/32 | 9 | 7 | — | 72 | 82 | 16 | 5/16 | |
2013 | 9.0 | — | 261 | 0.610 | 32½ | 5/16 | — | — | 5 | 68 | — | 21 | 5/16 | |
2016 (500) | 10.6 | — | 307 | 0.531 | 32 | — | — | — | 412 | 80 | 90 | 20 | 5/16 | |
2018 | 12.3 | — | 357 | 0.464 | 32½ | 5/16 | — | — | 4 | 89 | — | 19 | 5/16 | |
2020 | 13.5 | — | 392 | 0.426 | 33 | 5/16 | — | — | — | 64 | — | 18 | 5/16 | |
2114 (510) | 9.9 | 9.9 | 287 | 0.510 | 32½ | — | (11) | — | 7 | 78 | 100 | 25 | 5/16 | |
2115 | 10.8 | — | 313 | 0.461 | 33 | — | (11) | — | 7 | 83 | 100 | 25 | 5/16 | |
2117 (400) | 12.0 | 12.1 | 348 | 0.407 | 33 | 5/16 | — | — | 712 | 97 | 100 | 25 | 5/16 | |
2212 | — | 8.8 | 255 | 0.505 | 32½ | — | (13) | — | 9 | 1029 | 100 | 31 | 11/32 | |
2213 (460) | 9.8 | 9.9 | 284 | 0.458 | 33½ | — | (13) | — | 9 | 88 | 100 | 30 | 11/32 | |
2215 | 10.7 | 10.8 | 310 | 0.419 | 33 | 11/32 | — | — | 9 | 95 | 100 | 30 | 11/32 | |
2216 (380) | 12.0 | 12.1 | 348 | 0.376 | 33 | 11/32 | — | — | 9 | 98 | 100 | 29 | 11/32 | |
2219 | 13.8 | 13.9 | 400 | 0.337 | 34 | 11/32 | — | — | 8 | 107 | — | 26 | 11/32 | |
2312 (420) | — | 9.5 | 276 | 0.423 | 33 | — | (15) | — | 11 | 999 | 100 | 37 | 11/32 | |
2314 (420) | 10.7 | 10.8 | 310 | 0.391 | 33½ | — | (14) | — | 10 | — | 100 | 34 | 11/32 | |
2315 (340) | 11.7 | 11.8 | 339 | 0.342 | 34 | — | — | — | 1112 | — | 100 | 37 | 11/32 | |
2317 (300) | 13.3 | 13.4 | 386 | 0.297 | 34 | — | — | — | 1112 | — | 100 | 37 | 11/32 | |
2412 | — | 9.7 | 281 | 0.400 | 34 | — | (17) | — | 12 | 110 | 100 | 40 | 11/32 | |
2413 (360) | 10.4 | 10.5 | 302 | 0.365 | 34 | — | (17) | — | 12 | 110 | 100 | 40 | 11/32 | |
2512 | — | 10.3 | 299 | 0.321 | 34½ | — | (20) | — | 15 | 1089 | 100 | 52 | 11/32 | |
2513 (310) | 11.3 | 11.4 | 328 | 0.305 | 34½ | — | (18) | — | 14 | — | 100 | 48 | 11/32 |
— Indicates not available
1 XX75 Realtree Hardwoods HD Green, Camo Hunter, GameGetter, Legacy.
2 XX78 Super Slam.
3 Length is approximately stock shaft length for each size.
4 Nock size for conventional swaged nock taper.
5 UNI—Universal Nock Installation System
6 Prenthesis indicates smaller G Nock Uni Bushing size is available as an optional accessory.
7 RPS = Replaceable point System with 8.32 ATA Standard thread.
8 NIBB point grain weights are ± 0.5 grain. All other components are ± 1 grain.
9 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.F.O.C. is Front-of-Center balance position on the arrow shaft.
10 Whenever both XX75 and XX78 shaft models exist for any size, the weight shown represents the XX75 shaft model.
11 Super UNI Bushing accepts Super Nock, 3D Super Nock and S Nock
12 GameGetter composite bushing weight: 300 & 340 = 9 grains, 400 = 5 grains, 500 = 3 grains. 13 GameGetter and Super Slam Digital sizes indicated in parentheses.
Notes: Shaft size 1716 uses BAR4; sizes 1813 and 1816 use BAR6; size 1916 uses BAR8 broadhead adapter rings