Easton XX75 Jazz Shaft 箭桿(每打)

Easton
$1,750
+ −
加入下次購買清單 加入比較清單

Easton Jazz Shaft

入門最佳選擇

Size： 1214, 1413, 1416, 1516, 1616, 1716, 1816, 1916

Get high-performance accuracy at a great price.

SIZES

1214, 1413, 1416, 1516, 1616, 1716, 1816, 1916

Straightness: ± .005 
Weight tolerance: ± 2.0 
Hard–anodized 
Alloy

ALLOY SHAFT AND COMPONENT SPECIFICATIONS

SIZE SHAFT WEIGHT SHAFT WEIGHT @ 29" SPINE @ 28" SPAN STOCK LENGTH3 CONVENTIONAL NOCK SIZE4 UNI SYSTEM5 NIBB POINT ONE-PIECE BULLET POINT RPS7INSERT ALUM. RPS7POINT SIZE
XX751 XX72 751/X72 UNI BUSHING6 SUPER UNI BUSHING10
  Grains per Inch Grains Deflection in Inches Inches Inches Grains Grains Grains8 Grains8 Grains8 Grains8
1214 5.9 — 171 2.501 26 — — — — 45 — —
1413 5.9 — 171 2.036 26 7/32 — — — 35 — —
1416 7.2 — 209 1.684 27 7/32 2 — 46 52 — —
1514 — 6.8 197 1.379 26 — 5 — 619 — — —
1516 7.3 — 212 1.403 27½ ¼ 3 — 48 54 — —
1614 — 7.7 223 1.153 28 — 5 — 51 — — —
1616 8.4 — 244 1.079 28½ ¼ 5 — 56 63 — —
1713 7.4 — 215 1.044 29 — 7 — 54 — — —
1714 — 8.1 235 0.963 29 — 7 — 56 — — —
1716 9.0 — 261 0.880 29 ¼ 7 — 60 68 10 17/64
1813 7.9 — 229 0.874 30 ¼ 8 — 56 — 14 9/32
1814 — 8.6 249 0.799 29½ — 8 — 60 — — —
1816 9.3 — 270 0.756 30 9/32 8 — 63 74 12 9/32
1820 12.2 — 354 0.592 29½ 9/32 — — — 59 — —
1913 8.3 — 241 0.733 31 9/32 9 — 64 — 18 5/16
1914 — 9.3 270 0.658 30½ — 9 — 64 — — —
1916 10.0 — 290 0.623 31 9/32 9 — 72 82 16 5/16
2013 9.0 — 261 0.610 32½ — — 5 68 — 21 5/6
2014 — 9.6 278 0.579 31½ — (10) 5 71 — — —
2016 10.6 — 307 0.531 32 — — 4 80 90 20 5/16
2114 9.9 9.9 287 0.510 32½ — (11) 7 78 100 25 5/16
2212 — 8.8 255 0.505 32½ — (13) 9 1029 100 31 11/32
2213 9.8 9.9 284 0.485 32½ — (13) 9 88 100 30 11/32
2214 — 10.4 302 0.425 33 — (13) 9 1039 100 — —
2311 — 8.9 258 0.450 33 — (15) 11 999 100 37 11/32
2311 — 8.9 258 0.450 33 — (15) 11 999 100 37 11/32
2312 — 9.5 276 0.423 33 — (15) 11 999 100 37 11/32
2314 10.7 10.8 310 0.391 33½ — (14) 10 — 100 34 11/32
2315 11.7 11.8 339 0.342 34 — — 11 — 100 37 11/32
2412 — 9.7 281 0.400 34 — (17) 12 110 100 40 11/32
2413 — 10.5 302 0.365 34 — (17) 12 110 100 40 11/32
2511 — 9.6 278 0.348 34½ — (20) 15 1089 100 52 11/32
2512 — 10.3 299 0.321 34½ — (20) 15 1089 100 52 11/32
2612 — 10.7 310 0.285 34½ — (22) 17 — 150 58 3/8
2613 — 11.5 334 0.265 34½ — (22) 17 — 150 58 3/8
2712 — 11.3 328 0.260 34½ — — 19 — 150/300 — —

— Indicates not available
1 XX75 Blues, Jaxx and Platinum Plus
2 X7 Exclipse and Cobalt
3 Length is approximately stock shaft length for each size.
4 Nock size for conventional swaged nock taper.
5 UNI—Universal Nock Installation System
6 Prenthesis indicates smaller G Nock Uni Bushing size is available as an optional accessory.
7 RPS = Replaceable point System with 8.32 ATA Standard thread.
8 NIBB point grain weights are ± 0.5 grain. All other components are ± 1 grain.
9 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.F.O.C. is Front-of-Center balance position on the arrow shaft.
10 Super UNI Bushing accepts Super Nock, 3D Super Nock and S Nock